|
|
 |
|
|
Cleaning Machine Specifications
Model
MS4L/B110/61100. All steel base and frame; two pack epoxy coated Engine
Mitsubishi 25KW 4 cylinder diesel, naturally aspirated, radiator cooled, wet exhaust, rubber isolation pads, requires
no sea intake (Any other engine supplied as an option; price may vary). Customer can supply engine or purchase as a kit to
suit their engine. Dimensions
Width – 690mm
Height – 880mm
Length top – 1300mm Length
overall – 1700mm Weight
415kg dry Fuel Capacity
55 litres (run time @2100 RPM 500 PSI 35 BAR, pump load 15 hours) Hydraulic oil capacity
50 litres Auxiliary hydraulic drive
Vickers V10 5GPm 2250 PSI. Will drive all other necessary hydraulics.
Belt driven front of engine. Water pump output
Maximum 110 litres @ 725 PSI (50 BAR)
Maximum revs 550 RPM
Can run dry for extended periods
Requires no priming
Will lift from 5 metres Water pump drive
Direct coupled to engine through 6:1 reduction box Model
MK11 Stainless steel panel feed drive chain, hydraulically driven, reversible variable speed and feed torque Frame
All aluminium frame Dimensions
Length – 1775mm Width – 620mm
Table height – 880mm Height
overall – 1440mm Weight
100kg Operating water pressure capabilities
300PSI (20BAR) – 1200PSI (82 BAR)
No moving parts on HP water side Recommended operating pressure
500 PSI (35 BAR)
Requires 60 litres per minute @ 500 PSI (35 BAR) Hydraulic drive requirement
0.55KW flow 5 GPM 600 PSI
3 moving parts |
|
|